Tetric N Ceramic bulkfill Ivocolar

1,400.002,060.00 (-32%)

In stock

-> Free delivery on all orders above ₹2000

-> COD limited to order values up to ₹10,000 only

-> EMI options available

-> For quick queries and Bulk orders contact us on WhatsApp



  • Time-saving due to 4 mm bulk-filling
  • More esthetic than other bulk-fill composites. Particularly in cases of discoloured tooth structure
  • Ideal in combination with Tetric N-Ceram Bulk Fill and Tetric N-Ceram



The new flowable composite complements the mouldable Tetric N-Ceram Bulk Fill composite. In essence, Tetric N-Flow Bulk Fill is based on the composition of Tetric N-Ceram Bulk Fill. The material is applied as a bulk-fill base in Class I and Class II restorations. Just like the existing version, it can be light-cured in large increments of up to four millimetres, requiring only short light exposure times. Excellent affinity to cavity walls and self-levelling consistency round off the benefits offered by this volume replacement material.

Aessencio technology

  • Another strength of the new composite lies in the Aessencio technology. This technology causes the translucency of the material to decrease from 28% to approx. 10% during polymerization.


  • As initial layer / first increment in Class I and II composite restorations in permanent teeth
  • Restorations in deciduous teeth (without capping layer)




The monomer matrix is composed of monomethacrylates and dimethacrylates (28 wt%). The fillers include barium glass, ytterbium trifluoride and copolymers (71 wt%). Additives, initiators, stabilizers and pigments are additional ingredients (<1.0 wt%). The total content of inorganic fillers is 68.2 wt% / 46.4 vol%. The particle size of the inorganic fillers ranges between 0.1 μm and 30 μm with a mean particle size of 5 μm.

Storage temperature: 2–28 °C



  • 1 x 2gm syringe



Application of Tetric N-Flow Bulk Fill

  • Tetric N-Flow Bulk Fill can be applied in increments of up to 4 mm thickness.
  • Tetric N-Flow Bulk Fill must be covered with a layer of methacrylate based universal or posterior composite (e.g. Tetric N-Ceram/Tetric N-Ceram Bulk Fill/IPS Empress Direct).
  • Proximal contacts must be established by means of a matrix system. The filling material does not exert any pressure on the matrix band. The matrix band can be shaped with a suitable hand instrument (e.g. a balltype condenser) before and/or during light-curing.
  • Complete polymerization requires a sufficiently long exposure time. For the recommendations regarding exposure time and light intensity see table.
  • When using a metal matrix, additionally polymerize the composite material from the buccal or lingual/palatal aspect after removing the matrix, if no Bluephase N polymerization light is used or the light probe cannot be ideally positioned, e.g. distant to composite or diverging scattering angle.
 Unit Programm    Bluephase N   Bluephase NM   Bluephase NMC
 High Power 10 s (1200 mW/cm2 ) 15 s (800 mW/cm2 ) 15 s (800 mW/cm2 )
 Soft Start 15 s —— ——
 Low Power 20 s (600 mW/cm2 ) —— ——


Light intensity Exposure time
 ≥ 500 mW/cm2 20 s
 ≥ 1‘000 mW/cm2 10 s
Category: Pedodontics Tag: FLOWABLE BULKFILL
Be the first to review “Tetric N Ceramic bulkfill Ivocolar”

Your email address will not be published. Required fields are marked *


There are no reviews yet.

Main Menu