Dentsply Aquasil Putty regular (base and catalyst) 2x450ml

DESCRIPTION

Aquasil Soft Putty/Regular Set is a very high viscosity impression material with optimum flexibility for easy removal from undercuts.

COMPOSITION:

Base:

Silica Crystalline
Vinyldimethicone
Zeolith Highly dispersed silica (AEROSIL®1)
Paraffine oil
Polydimethyl-hydrogen siloxane
Green pigment (Cosmetic Green, C.I. 77288)
Yellow pigment (Arc Yellow A16 N)

Catalyst:

Silica Crystalline
Vinyldimethicone
Zeolith
Highly dispersed silica (AEROSIL®1)
Paraffine oil
Platinum complex + Pt-metal
Calcium carbonate 1,3-Divinyltetramethyldisiloxane
Titanium dioxide

INDICATION:

It is for use as a tray material for the double mix technique or as primary impression material for a two-step putty/wash technique.

ADVANTAGE:

High tear strength.
More stable dimensionally in storage ( No synersis, imbibation or evaporation)

KEY SPECIFICATION

HANDLING CHARACTERISTICS

Application

Time (seconds)

Aquasil Soft Putty

Aquasil Ultra LV (Regular Set)

Mixing time

0:30

N/A

Application time

1:30

2:15

Minimum time in mouth (ISO)

3:00

2:45

Setting time

4:30

5:00

PROPERTIES OF AQUASIL PUTTY:

Material Properties: Aquasil Soft Putty
Delivery System: Tubs
Mixing technique: Knead with fingertips until a uniform color is achieved.
Mixing Ratio: 1:1
Linear dimensional change: 0.05%
Maximum compression strain: 3.5%
Permanent deformation: 0.5%
Recovery from deformation: 99.5%
Reproduction of detail: <50µm

PACKING

1 x 450 ml Catalyst
1 x 450 ml Base.
2 Spoons

DIRECTION TO USE

STEP 1- Preparation of Impression Area

Clean the Impression area with air/water spray and remove excess water.

STEP 2- Mixing and filling the tray

Take equal amounts of catalyst and base using the color-coded measuring spoons and knead with fingertips until the colour of the mix is uniform. Immediately fill prepared tray.