• More economical than addition silicones or polyethers
• They are characterized by a good accuracy and an ideal working time/setting time ratio.
• Pressure, moisture and heat, which are conditions that prevail when introducing the impression tray in the oral cavity, immediately increase the fluidity of the material and
  guarantee an impression taking that is very precise along the edges.

INDICATIONS

• Used as a Rubber base impression material.

ADVANTAGES

• Reduces mucous compression in the phase of insertion in the oral cavity.
• Excellent hardness after setting.
• In the two-stage technique, it acts perfectly as a special tray, In double mixing, it adapts to the consistency of low viscosity fluid.
• Variable working and setting times according to catalyst quantity (Indurent gel)
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray.
• Excellent relation between rigidity and elasticity
• Ideal working time/setting time ratio
• High flowability and accuracy of wash materials
• Putty and wash materials with the same catalyst.

REDUCED MARGIN OF ERROR

• Clear color contrast to reduce the risk of error, consequently saving time and material.

BALANCED REACTIVITY

• Ideal balance between working time and setting time. (Snap-set effect).
• The optimal dosage of the catalyst increases the available working time and reduces contraction

“FLOW CONDITIONING” EFFECT

• Increased flowability and extreme dimensional stability are achieved thanks to SAS (Synthetic Amorphous Silicas) high-activity spheroid fillers.

Features

• High initial flowability
• Green colour
• Spearmint flavour
• The different scents, from mint to orange, pleasant for the patient and professionals.

Key Specifications

Tech Information

High initial flowability and excellent rigidity after hardening for the putties

• Thixotropy for the washes
• High tear resistance

Packaging

Zhermack Zeta Plus Intro Kit

• 1 x 900ml Putty
• 1 x 60ml Catalyst
• 1 x 140ml Light Body Tube

Direction to Use

STEPS –
Prepare a tooth for a crown.
After applying GC Tray adhesive, Zhermack Zetaplus putty is loaded on the stock tray.
The putty impression is taken.
Using the putty cutter creates a space for the light body.
Inject the Zhermack Zetaplus light body around the prepared tooth, then immediately re-seat the putty tray impression.
The final impression is taken.